ULTRA HIGH SPEED RANGE ⟩⟩

---

Ultra High Speed Spinning with take-up speeds 8000 Mtrs/Min & more of mono & multi filament yarns, requiring higher suction power (higher operating pressures), simultaneous threading up to 12 ends / take-up or more. Does not loose yarn tension even at extreme take-up speeds. BCF, Staple fibres, etc.

- Air Pressure : 6 to 18 bar (kg/cm2)
- Air Consumption : 360 Nm3 /hr at 8 bar
- Air Connection : 1” Ball Valve.
Inlet Pipe - 25 mm or 3/4" I/D Hose with 1” BSP male threaded end connector. Outlet (Waste) Pipe - 32 mm O/D.
OPTIONAL Waste Pipe - 38.1 mm O/D. This increases velocity of air currents within the nozzle resulting in smooth & higher suction performance, as desired in specific applications.
OPTIONAL Off-set Adopter for Valve, facilitates accommodating larger hose, on enlarged waste pipe as above, for specific applications. - Weight : 1.2 -1.35 Kgs, depending on model with protective sleeve on suction pipe. Over all length : Approx. 414 mm

• Model : AEC - 500 U
Denier Range peed : 2,000 Dtex Total.
Suction Pipe : 5 mm I/D.
Yarn Speed : 8,000 Mtrs / Min.

• Model : AEC - 750 U
Denier Range : 4,000 Dtex Total.
Yarn Speed : 8,000 Mtrs / Min.
Suction Pipe : 7 mm I/D.

• Model : AEC - 1000 U
Denier Range : 12,000 Dtex Total.
Yarn Speed : 6,500 Mtrs / Min.
Suction Pipe : 10 mm I/D.

• Model : AEC - 1250 U
Denier Range : 15,000 Dtex Total.
Yarn Speed : 6,000 Mtrs / Min.
Suction Pipe : 12 mm I/D.